Thursday, July 28, 2011

paper crafts

Cards

Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

making an envelope for the card


This is the template for making an envelope.

Materials needed
  • The card that will be going into the envelope.
  • Template of envelope
  • Paper
  • Scissors
  • Glue
  • Rule
  • Pencil
Method used.
  1. Near a corner edge of the paper draw a 2.5 cm [1 inch] line down -along side the paper
  2. Now draw a 2.5 cm [1 inch] line down the other corner edge of the paper
    1. There are now two intersecting lines.
  3. Place your card near the inside corner edge of the intersecting lines. 
    1.  0.5 cm away from these lines as this will allow room to slip the card in and out of the envelope.
  4. Draw a third and fourth  line at 0.5 cm away from the card.
  5. Measure the area from the draw line at the top of the card to the bottom of the card line.
  6. Draw another square shape the same size attached to the card sized box.  This is the back flap of the envelope.
  7. One more thing to measure and that is the other side flap.
  8. Cut out the outline - not the fold lines though.
  9. Fold all the fold lines.
  10. The side Flaps get glued.
  11. The back side is pressed onto the glued side flaps.
    1.  Leave to dry before you place the card in your envelope.
  12. Fold over the top flap.
    1. Glue if necessary - or simply tuck the flap into the back of your envelope.


Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Celebratory note pad.

You will need:

  • Old card font -  from things like Christmas, birthday, welcome home cards.
  • Scissors
  • Hole Puncher
  • Ribbon
  • Thin Cardboardcards (52K)
  • Glitter
Method

  1. Cut out the shape from the front of the card.
  2. Draw around this cut out piece on a piece of cardboard.
  3. Cut out the cardboard template
    1. This becomes the template.
  4. Using the template cut out around all 10 pieces of paper.
  5. With a hole puncher make 2 holes at the top of all the paper and cardboard.
  6. Thread the ribbon through.
  7. Tie with a bow at the front loosely so that the note pad can be opened and flipped back.


Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Saturday, July 23, 2011

Bath Salt recipe

Materials needed:

  • Bottle or jar
  • Epsom Salts
  • Food coloring
  • Essential oils
Instructions
  1. Combine the desired amount of Epsom salts [enough to fit in the bottle or jar] with food colouring.
  2. Mix well so that the base color is evenly distributed through the Epsom Salts.
  3. Add the Essential oil and mix again.
  4. Spread the mixture out on a sheet of wax paper to dry for a couple of hours.
  5. Funnel the dry mixture into the bottle.
  6. Secure the lid.

While the Bath Salts can be used straight away the oils will stand a better chance of blending better if they are allowed to settle for a few weeks.


Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Ocean sceen from the inside of a jar.

Either use the shells and small pebbles that you have collected to take home or the ones purchased through craft stores to make a lovely jar picture.


Materials needed

  • Hardy glue
    •      Or Glue gun and glue
  • Shells
  • Pebbles
  • Small amount of sand
  • Hairspray
  • Cardboard
  • Thread
  1. Attach the shells and or pebbles into the inside of the jar.  
  2. This will take some time as the glue needs to be set before another area is begun.
  3. When half of the jar has been completed then evenly place a small amount of sand in the jar.
  4. Spray the inside of the jar with hair spray.  
    1. Enough to stick a thin layer of sand to the inside of the glass.
  5. Tie a piece of thread around the top of the jar.  
  6. Cut out a small ocean creature shape.
  7. Decorate this. Punch a small hole in the shape. 
  8. Thread the cut out onto the hanging thread attached to the top of the jar.
  9. Place the shape on the inside of the jar.
  10. Secure the jars lid.



Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Crocheted Yellow daisy

Yellow Daisy
This flower appliqué can be added to any hat, pillow, or blanket. The daisy appliqué is 2.5cm [4 inches] wide. 


Materials needed:
  • baby Yarn - lemon or brown
  • hook Size: G/4.25mm





CH = Chain
SL = Slip Stitch
SC = Single Crochet
HDC = Half Double Crochet
DC = Double Crochet
TR = Triple Crochet






  1.  Decide what you are going to use the flower for. If you would like this as a barrette you may need to finish making it and then use starch to stiffen it up.
  2.  However if you are going to place the flower on a woollen surface then attach Yellow yarn to top of area and in a circular fashion crochet the following:


Rnd 1: CH 6, SL in 1st CH made, SC in project, Repeat 4 times in circular fashion, SL next to beginning CH made, Do not turn.
Rnd 2: In Ring sp - 2 SC, 2 HDC, 2 DC, 2 TR, 2 DC, 2 HDC, 2 SC, Rep 4 times, SL in first SC, Tie off, hide string.

Center Rnd 1: SC around the perimeter of center, do not turn.
Rnd 2-3: SC around, do not turn.
Rnd 4: Cut a long tail and pull loop up. With a darning needle sew back and forth through each SC, Pull string to close center of flower, tie off, hide string.


Altered by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Crochet Angel Ornament


angel
Materials needed:


  • 4 ply yarn,
  •  Crochet Hook G
  • 0.5 cm [1/8"] ribbon
  • ribbon roses, hearts, etc.



CH = Chain
SL = Slip Stitch
SC = Single Crochet
HDC = Half Double Crochet
DC = Double Crochet
TR = Triple Crochet




Head: 
Ch 4, 11 dc in 4th ch from hook. Sl st to join. (12 dc)     

Body:
 Ch 4, (count this as first tr) 2 tr in same st as beg ch 4, 3 tr in next dc, turn. (6 tr) Ch 3, (count this as first dc) dc in same st as beg ch, dc in each of next 4 dc, 2 dc in last tr, turn. (8 dc) Ch 1, sc in first dc, (ch 3, sc in next dc). 
Repeat across and end with sc in last st. (8 sc, 7 ch 3 sps)
Wings: 
Make 2 Attach yarn with a sl st in space between head and body. 
Ch 4 (first tr, 3 tr in same sp. Fasten off. Repeat for other wing.
 Work all ends in on back side of angel.
Tie bow with ribbon around center st between head and body. 
Or glue ribbon roses, hearts, etc. to center st. 
Tie gold thread or clear plastic thread to top of angel to hang by.

If using the angel as an ordainment tie a small piece of ribbon through the top.
 Join ribbon together by tying off as a ribbon


Altered by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me