Friday, July 29, 2011

Silver bells

bells
You will need


  • paper cups
  • wooden 
  • tin foil
  • pipe cleaners
Method
  1.  
  2. Wrap the tin foil around the outside of the cups.
  3. Tuck the top edge up the inside of the cup.
  4. Slide a wooden bead on the bottom of the pipe cleaner.
  5. Half knot the bottom of the pipe cleaner.
    1. thread the pipe cleaner end back through the wooden bead so that there are no sharp points.
  6. Knot the pipe cleaner half way.
  7. Stick a pipe cleaner up through the middle of the cup until the knot stops it from going through.
  8. Loop the top end of the pipe cleaner back around twisting off at the top of the cup.
    1. Makes a loop to hang the cup with. 
  9. The tin foil at the top of the cup now can be moulded around the pipe cleaner at the top of the cup.


Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Play Dough 1

You will need

  • 1 cup flour
  • 1 cup warm water
  • 2 tsp cream of tartar
  • 1 tsp oil
  • 1/4 cup salt
  • food colouring
Method
  1. Mix all ingredients, adding the food colouring last.
  2. Stir over a medium heat until smooth.
    1. about 3 to 5 minutes.
  3. When mixture forms a ball in the pot remove from the pot and knead until smooth.
  4.  Let cool.
  5. Can be kept in an air tight container until ready to use.


Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Thursday, July 28, 2011

Cinnamon Ornaments

You will need

  • 1 cup cinnamon
  • 1 tbsp cloves
  • 1 tbsp nutmeg
  • 2 tbsp white glue
  • 3/4 cup apple sauce [ let this drain in a strainer for several hours]
  • Cookie cutters
  • Straw
  • Ribbon
  1. Mix the cinnamon, cloves and nutmeg with the apple sauce and glue.
  2. Work the mixture in your hands until it is smooth and well mixed.
    1. No lumps.
  3. Roll out to 0.7 cm [1/4 inch] thickness and cut with cookie cutters.
  4. Use a straw to make a hanging hole.
  5. Put on wire rack to dry at room temperature for several days.
  6. turn twice daily as this avoids curling.
  7. Thread a piece of ribbon to hang tying off with a double knot..


Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Hiking necklace


back to school bandana book cover
Materials needed
  • Assorted Pony Beads
  • Magnifying Glass
  • Flash light and working batteries.
  • Compass Key Ring (Not Shown)
  • Whistle
  • Hole Punch

Method
  1. Untie the knot on the cord that comes with the whistle.
  2. Retie the cord with a double knot down near the whistle .
  3. This holds the whistle in place.
  4. String three beads each side of the whistle.
  5. String on a small flash light.
  6. Tie off with a double knot.
  7. Add three more beads and another double knot.
  8. Punch a hole in the magnifying glass handle.
  9. String it onto the necklace cord.
  10. Double knot this in place.
  11. Add three more beads.
  12. Repeat the process again and add a small compass.
  13. Tie the ends of the cord together to finish.

Objectives 
  • To keep all emergency equipment together and in easy reach.
  • Introduce safety aspects to organising planning and participation.








Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Paper Plate Christmas Tree

You will need

  • 2 paper plates
  • 1 A3 size paper or cardboard
  • Green Paint
  • Glitter]Stickers
  • Sequins
  • Very thin cut streamers.
  • Textas
  • Star for the top of the tree.

Method
  1. Paint the paper plates green.
  2. When dry cut both the plate in half.
  3. Cut one of these plates in half again.
    1. Now you have 3 halves and 2 quarters.
  4. On the A3 sheet arrange the plate pieces to look like a tree.
  5. Draw a tree trunk at the base of where the tree will be.
  6. Glue the only the flat part of the plate pieces [tree pieces] in place
    1. bottom ones first.
    2. gives a 23 d effect.
  7. Decorate the tree with glitter and stickers or sequins and very thin cut streamers.
  8. Add a star to the top of the tree



Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Greeting card puzzles

Materials needed

    cards_puzzles.gif (26563 bytes)
  • Greeting or celebratory cards
  • Glue that sticks wood and card
  • Craft sticks like lice block sticks
  • Scissors
  • Sharpe cutting knife
  • Tape
Method


  1. Cut off the front of the card.
  2. Trim  or shape the cut off down to the size you want.
  3. lay out enough craft sticks to fit the card size.
  4. Use tape to hold them together.
  5. This now becomes the back side of the card puzzle.
  6. Turn over the card puzzle.
  7. Spread a layer of glue on the front side of the sticks.
  8. Push the card down onto the sticks.
  9. Any excess glue gets wiped off with a damp cloth.
  10. When the glue is dry peel away the tape at the back of near complete the card puzzle.
  11. Use a sharp knife to slice through the card where the craft sticks meet.
  12. Place all the card puzzle in your own home made envelope. 

Altered by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me

Made cards

Greeting card puzzles
Recycled celebratory cards

Encouraged to be writen by Clear Vision Enterprises Contact info: cve4me.com cve4me@gmail.com @twitter/cve4mejournal Facebook : cve4me